Skip to main content

Old browsers are still running behind your firewall

On January 12th 2016, Microsoft announced it will stop supporting older versions of Internet Explorer.

It means from now on, Internet Explorer 10 and prior will not get security updates. However many people are still using older versions of Internet Explorer, and it has become a potential threat.

In July 2016, Dell SonicWALL observed that:
- 0.7% of firewalls reported use of Internet Explorer 5.x.
- 60.6% of firewalls reported use of Internet Explorer 6.x.
- 71.1% of firewalls reported use of Internet Explorer 7.x.
- 22.4% of firewalls reported use of Internet Explorer 8.x.
- 24.3% of firewalls reported use of Internet Explorer 9.x.
- 31.5% of firewalls reported use of Internet Explorer 10.x.

Unpatched Internet Explorer is insecure and can damage the system. So, we, ICT For Myanmar would like to urges all our customers to review their environment and stop using Internet Explorer 10 and prior.

Source : Dell SonicWall Security Center

Have a good time.

(Be knowledgeable, pass it on then)

Comments


  1. Click here Happy New Year 2k20 Offers grab Opportunity with 25% Off ALL Products

    Order Now>> Buy Online Medicine free Shipping in US TO US 3 To 4 days Delivery

    Buy Tramadol Online
    Buy Xanax Online
    Buy Ambien Online
    Buy hydrocodone online
    Buy Adderall Online
    Buy Phentermine Online
    Buy Valium Online

    ReplyDelete
  2. Hey! very nice blog. Thank you very much for this one. And I hope this will be useful for many people.. If you want to buy online medicines please visit - North Mart Pharmacy

    And other medicines are also her plese check and buy 24/7

    Buy tramadol online
    Buy Valium Online
    Buy Soma Online
    Buy ambien 10 mg
    Buy Adderall Online
    Buy Xanax Online



    ReplyDelete


  3. If you are feeling very depressed, have any panic disorders, Mental Stress, Anxiety Disorders visit the page and resolve all these problams and also New Year Offer begain offer limited period.

    Call Now For Buy Anxiety Medicines at very cheap price as compair to other dealer.:- +1 347-662-3430
    Click here Happy New Year 2k21 Offers grab Opportunity with 25% Off ALL Products

    buy tramadol online overnight
    buy tramadol online
    buy tramadol online

    ReplyDelete
  4. Pretty nice post. I just stumbled upon your blog and wished to say that I have really enjoyed surfing around your blog posts.
    After all I will be subscribing to your rss feed and I hope you write again soon! tramadol overnight usa

    ReplyDelete
  5. Muscle Relaxer Buy Soma 350 mg online
    Soma 350mg (carisoprodol) is a muscle relaxer that blocks pain sensations between the nerves and the brain. Soma is used together with rest and physical therapy to treat skeletal muscle conditions such as pain or injury. For more details please visit on website...

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete
  7. Buy Valium 10mg Online is uses to treat symptoms of anxiety, muscle spasm, alcohol withdrawal and as a sedative before surgery or to treat seizures. Valium may be used alone or with other medications.
    visit www.healthcareculb.com for fast and discreet delivery.

    ReplyDelete
  8. Sildenafil Soft ChewableTablet is a prescription medication, one needs share the medical history with a doctor to make sure it is an appropriate treatment.

    ReplyDelete

Post a Comment

Popular posts from this blog

Fortigate guide for Begineer - 6

I would like to explaine how to troubleshoot the Fortigate Unit configured by Transparent Mode in step by step this time. Let's assume, you have one Fortigate Unit that configured as Transparent Mode. But devices from Internal/Private Network unable to access Internet/Public Network through your Fortigate Unit. OK. Let's troubleshoot with following steps, 1) Check the physical network connections between the network and the FortiGate unit, and between the FortiGate unit and the Internet. 2) Check the router and ISP-supplied equipment to make sure it is operating correctly. 3) Verify that you can connect to the internal interface by connecting to the management IP address of the FortiGate unit from the Internal network. From the internal network, attempt to ping the management IP address. If you cannot connect to the internal interface, verify the IP configuration of the PC and make sure the cables are connected and all switches and other devices on the network are powered on a

Solving the "A general system error occured:Invalid fault" error in vSphere 4

Below error was come out when you try to migrate VM to other host for some reason. Below error was come out when you try to edit VM setting. Below error was come out when you power on the VM. How to solve those error? Here is how I resolve the error! Login to the Host that errored VM exist by using Terminal or Direct Console. Enter below command and press enter. services.sh restart Wait until all VMware Services are restarted. After that try to Power On/Edit Settings or Migrate the errored VM and you will see all you can do without any error pop-up. This kind of errors can occur if you shutdown/restart VM unproperly or shutdown/restart the Host unproperly that VM exist. You can check log file deeply if you willing to know precisely on this. May you all be happy. (Be knowledgeable, pass it on then)

Link Aggregating with Synology NAS and Cisco Switch

I’d like to share how to setup Link Aggregating between Synology NAS and Cisco Switch. I’ve got one Synology NAS with 4 Network Ports and I’m going to use 2 of them. Both Network Port to be as one Logical Link, Fault Tolerance and Load Balancing. To do that, I need to configure Link Aggregating on Synology NAS and EtherChannel with LACP on Cisco Switch. Below is brief steps to do to meet with my requirements. - Get connected Synology NAS and Cisco Switch as shown in picture. - Bonding two Network Ports of Synology NAS and assign IP Address - Configure EtherChannel with LACP in Cisco Switch and add two physical ports as Member. OK. Let’s begin from Synology NAS. - Login to the Synology and go to Control Panel>Network>Create>Create Bond - Select IEEE 802.3ad to get Fault Tolerance and Load Balancing Featureyou’re your switch not support 802.3ad you can only select Fault Tolerance only feature). After that click “Next”. - Choose the network port f