Skip to main content

How to create Digital Signature by using Adobe Reader and webcam?

Hi,I'd like to share how to create digital signature by using adobe reader and webcam Today.
But honestly I'd like to say it's only work with pdf format document and you need PC/Laptop with Webcam.
Nowadays, we are working with electronics document and all of time we need our signature on that.
So, mostly we print out document as hard-copy and do signature on that and scan that document again as completed document with signature.
Don't you bother for this a lot of steps?

Now I'm gonna show you how to bypass those boring steps.


First, open the PDF document in Adobe Reader as show below picture. If Adobe Reader detects a signature field, it’ll prompt you to open the Sign pane. If not, just click the Sign button at the top-right corner.


Use the Place Signature option to use a real signature.
Choose "Use a webcam" option when you have asked. I believe this is more convenient for most of people.



Then sign a piece of white paper in black ink, hold it up to your webcam, and scan it in.
Once you have scanned your signature, use the Place signature button to insert and position it anywhere in a PDF document.




You only have to scan in your signature once and you can quickly insert your signature in other documents in the future.
You can now save your PDF file using the standard Save option under the File menu.
After your document saved, Adobe will prompt you to use Adobe EchoSign to send your signed document. Just choose "Not now".


Take note one thing that I was used Adobe Reader XI to create this post. I haven't test with any older Adobe Version.


May you all be happy.
(Be knowledgeable, pass it on then)

Comments

  1. Good Post! Thank you so much for sharing this pretty post, it was so good to read and useful to improve my knowledge as updated one, keep blogging…
    electronic signature

    ReplyDelete
  2. After reading your article I was amazed. I know that you explain it very well. And I hope that other readers will also experience how I feel after reading your article. Digital Signature

    ReplyDelete
  3. This blog is very nice and informative about Rent Agreement . Thanks for sharing this blog. I am waiting for your next articles. Keep it up.

    ReplyDelete

Post a Comment

Popular posts from this blog

Fortigate guide for Begineer - 6

I would like to explaine how to troubleshoot the Fortigate Unit configured by Transparent Mode in step by step this time. Let's assume, you have one Fortigate Unit that configured as Transparent Mode. But devices from Internal/Private Network unable to access Internet/Public Network through your Fortigate Unit. OK. Let's troubleshoot with following steps, 1) Check the physical network connections between the network and the FortiGate unit, and between the FortiGate unit and the Internet. 2) Check the router and ISP-supplied equipment to make sure it is operating correctly. 3) Verify that you can connect to the internal interface by connecting to the management IP address of the FortiGate unit from the Internal network. From the internal network, attempt to ping the management IP address. If you cannot connect to the internal interface, verify the IP configuration of the PC and make sure the cables are connected and all switches and other devices on the network are powered on a

Solving the "A general system error occured:Invalid fault" error in vSphere 4

Below error was come out when you try to migrate VM to other host for some reason. Below error was come out when you try to edit VM setting. Below error was come out when you power on the VM. How to solve those error? Here is how I resolve the error! Login to the Host that errored VM exist by using Terminal or Direct Console. Enter below command and press enter. services.sh restart Wait until all VMware Services are restarted. After that try to Power On/Edit Settings or Migrate the errored VM and you will see all you can do without any error pop-up. This kind of errors can occur if you shutdown/restart VM unproperly or shutdown/restart the Host unproperly that VM exist. You can check log file deeply if you willing to know precisely on this. May you all be happy. (Be knowledgeable, pass it on then)

Link Aggregating with Synology NAS and Cisco Switch

I’d like to share how to setup Link Aggregating between Synology NAS and Cisco Switch. I’ve got one Synology NAS with 4 Network Ports and I’m going to use 2 of them. Both Network Port to be as one Logical Link, Fault Tolerance and Load Balancing. To do that, I need to configure Link Aggregating on Synology NAS and EtherChannel with LACP on Cisco Switch. Below is brief steps to do to meet with my requirements. - Get connected Synology NAS and Cisco Switch as shown in picture. - Bonding two Network Ports of Synology NAS and assign IP Address - Configure EtherChannel with LACP in Cisco Switch and add two physical ports as Member. OK. Let’s begin from Synology NAS. - Login to the Synology and go to Control Panel>Network>Create>Create Bond - Select IEEE 802.3ad to get Fault Tolerance and Load Balancing Featureyou’re your switch not support 802.3ad you can only select Fault Tolerance only feature). After that click “Next”. - Choose the network port f