Skip to main content

How to solve Canon Multi-Functional Printer unable to print with PIN Management via Print Server?

Last fews ago, I've got one task that to setup one Printer Server for another VMware View Project.

So, I've setup Print Management Server on Windows Server 2008 Standard Edition R2 Service Pack 1.

After Server Setup and Printers Setup done on Server, I tried test print on Workstation and the result is no issue when print out documents directly.

But when I choose with Department PIN to print out documents for billing and secure purpose, it's not working.

I've tried several methods what I knew based on my knowledge and Google Results, but still not resolve the issue till some time.

After digging many resources on Google few days and found out one method to resolve the issue and it's resolved my issue.

So, I'd like to share my experience to others who might facing this issue to resolve with east and less time consuming.

The steps are as below,

1) Download Latest Driver for Your Canon Multi-Functional Printer/Copier on Your Server. But your drive should be some sort of UFRII.
2) After downloaded, you should see "misc" folder inside it and install "DIASsetup.exe" on server.
3) Once installation is done, you can try to print documents with PIN or query device information on Workstation and you will see it's working.

Main reason is we need to install Network Assistant Application of Printer/Copier to working well.

May you all be happy.
(Be knowledgeable, pass it on then)

Comments

  1. It is truly a well-researched content and excellent wording. I got so engaged in this material that I couldn’t wait to read. I am impressed with your work and skill. Thanks. free standing display units

    ReplyDelete
  2. I read this article, it is really informative one. Your way of writing and making things clear is very impressive. Thanking you for such an informative article. digital printing uk

    ReplyDelete
  3. Printers are one of the most important devices for home offices, thank you for sharing this colour printer. Your article isn’t only useful but it is additionally really informative. As a seller of premium remanufactured toner cartridges and Printer ink in Delaware, I am glad to come across this, great blog.

    ReplyDelete
  4. Wow, cool post. I'd like to write like this too - taking time and real hard work to make a great article... but I put things off too much and never seem to get started. Thanks though. Epson ink cartridges

    ReplyDelete
  5. Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I'll be subscribing to your feed and I hope you post again soon. Big thanks for the useful info. Compatible hp 12a black toner

    ReplyDelete

Post a Comment

Popular posts from this blog

Fortigate guide for Begineer - 6

I would like to explaine how to troubleshoot the Fortigate Unit configured by Transparent Mode in step by step this time. Let's assume, you have one Fortigate Unit that configured as Transparent Mode. But devices from Internal/Private Network unable to access Internet/Public Network through your Fortigate Unit. OK. Let's troubleshoot with following steps, 1) Check the physical network connections between the network and the FortiGate unit, and between the FortiGate unit and the Internet. 2) Check the router and ISP-supplied equipment to make sure it is operating correctly. 3) Verify that you can connect to the internal interface by connecting to the management IP address of the FortiGate unit from the Internal network. From the internal network, attempt to ping the management IP address. If you cannot connect to the internal interface, verify the IP configuration of the PC and make sure the cables are connected and all switches and other devices on the network are powered on a

Solving the "A general system error occured:Invalid fault" error in vSphere 4

Below error was come out when you try to migrate VM to other host for some reason. Below error was come out when you try to edit VM setting. Below error was come out when you power on the VM. How to solve those error? Here is how I resolve the error! Login to the Host that errored VM exist by using Terminal or Direct Console. Enter below command and press enter. services.sh restart Wait until all VMware Services are restarted. After that try to Power On/Edit Settings or Migrate the errored VM and you will see all you can do without any error pop-up. This kind of errors can occur if you shutdown/restart VM unproperly or shutdown/restart the Host unproperly that VM exist. You can check log file deeply if you willing to know precisely on this. May you all be happy. (Be knowledgeable, pass it on then)

Link Aggregating with Synology NAS and Cisco Switch

I’d like to share how to setup Link Aggregating between Synology NAS and Cisco Switch. I’ve got one Synology NAS with 4 Network Ports and I’m going to use 2 of them. Both Network Port to be as one Logical Link, Fault Tolerance and Load Balancing. To do that, I need to configure Link Aggregating on Synology NAS and EtherChannel with LACP on Cisco Switch. Below is brief steps to do to meet with my requirements. - Get connected Synology NAS and Cisco Switch as shown in picture. - Bonding two Network Ports of Synology NAS and assign IP Address - Configure EtherChannel with LACP in Cisco Switch and add two physical ports as Member. OK. Let’s begin from Synology NAS. - Login to the Synology and go to Control Panel>Network>Create>Create Bond - Select IEEE 802.3ad to get Fault Tolerance and Load Balancing Featureyou’re your switch not support 802.3ad you can only select Fault Tolerance only feature). After that click “Next”. - Choose the network port f